81-100 of 539 results
Sort By


This Electrical Design Engineer position is fit for a machine tool design engineer that can engage in machine & related equipment development. Under direct supervision, incumbent will assist in the design, layout, testing, and evaluation of electrical and electro-mechanical devices and systems. Incumbent may design support for existing product lines and/or modification of hardware in production. This design engineer will perform product development activities including interpretation and....

- Audubon, PA

Title: CNC Swiss Lathe Set-Up Operator Job Classification: Full-time/Non-Exempt Department: Manufacturing Shift: 1st shift (7:00am-3:30pm) Location: Audubon, PA Operate and set up CNC Swiss Lathe machines to produce parts, all of which must meet the dimensional specifications of the mechanical engineered drawing. Job ResponsibilitiesSetup tools, geometry offsets, program offsets, comprehend program code, all inclusive to enable part to run successfully in machine. Load/unload parts from....

- Newark, NY

Job Summary: Responsible for the day-to-day aspects of Process Engineering. This includes, but is not limited to, assisting, developing and promoting process improvements. Responsible for designing and implementing process controls, assisting in the development and introduction of new products and processes. Monitors production, giving effective feedback to production personnel. Applies problem-solving skills to ascertain the root cause of production problems, and determines the best course of


Successful Swiss machine tool company is looking for a service technician and application engineer. Our service technician repair machines mechanically as well as electrically, will travel nationwide and parts of Canada to install and repair CNC machines as well as train new operators. You must able to travel with passport, work independent and be able to function on the road. International travel to Europe for the purpose of factory training is a must. Our company is importing and servicing....


Title: CNC Machinist Milling Operator Job Classification: Full-time/Non-Exempt Department: Manufacturing Shift: 1st & 2nd shifts (7:00pm-3:30pm/3:00pm-11:30pm) Location: Audubon, PA The CNC Machinist Milling Operator will operate CNC milling machines to produce parts, all of which must meet the dimensional specifications of the mechanical engineered drawing. Job ResponsibilitiesLoad/unload parts from machine. Measure and inspect. Learn to make dimensional adjustments (offsets). Resolve and

- Audubon, PA

The Model Maker/Prototype Machinist is responsible for prototype fabrication to support product development. This includes bringing a product from idea/concept through design, prototyping, development, testing, design verification and validation, manufacturing, and product introduction. Out-of-shop duties include attending design reviews and brainstorming meetings. This individual will also be responsible for maintenance of the machines including calibration, regularly scheduled maintenance,....

- Audubon, PA

Title: Manufacturing Engineer/CNC Programmer - Milling Job Classification: Full-time/Non-Exempt Department: Manufacturing Reports To: Location: Audubon, PA Support Projects and Operations of various CNC multi-axis Milling machining centers to facilitate production. Develop processes for manufacturing in accordance with ISO-13485. Job ResponsibilitiesMaintain efficiency of production thru machine and process improvement.Maintain quality objectives while controlling costs.Adhere to and maintain....


Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to:Creating and updating documentation of technical information. Developing, preparing,....

- Audubon, PA

Title: CNC Machinist Milling Set-up Operator Job Classification: Full-time/Non-Exempt Department: Manufacturing Shift: 2nd shift (3:00pm-11:30pm) Location: Audubon, PA Operate and Set up CNC Milling machines to produce parts, all of which must meet the dimensional specifications of the mechanical engineered drawing. Job ResponsibilitiesSetup tools, geometry offsets, program offsets, comprehend program code, all inclusive to enable part to run successfully in machine. Load/unload parts from....

- Davis, CA

This Electrical Engineer Position is responsible for engaging in electrical design and programming of machine tool and related equipment development. Under direct supervision the incumbent will provide solutions to CNC machine tool operations including in-process machine evaluation, PLC programming, material handling, electrical wiring, equipment design and implementation, and machine assembly. The incumbent may support design for existing product lines and/or modification of hardware in....


Job Title: Field Service Technician - Flat Sheet Laser Department: Service FLSA Status: Non-Exempt Position Description Summary: Under direct supervision of the Service Manager, performs new equipment installations, preventive maintenance, troubleshooting, and emergency repair of company equipment at the customer site. Facilitates timely resolutions to customer issues and/or questions while maintaining a positive client relationship. Essential Function(s) of the Position: The duties listed....

- Skokie, IL

EDM & CNC job shop in updated facility close to highways in north Suburbs of Chicago seeks an experienced and quality conventional EDM operator/programmer to work full-time. Duties & Responsibilities: Set-up a machine for a specific job according to process sheetsPerforming G-Code programming (MasterCam, & Esprit programming a plus)Input control instructions into control unitsCalibrate and adjust equipment using tools such as calipers, micrometers, protractors, etc.Inspect parts....


Job Title: Application Engineer, Laser Department: Laser Applications FLSA Status: Non-Exempt Position Description Summary: Under direct supervision of the Laser Product Manager, analyzes the customer’s application requirements and selects the equipment that would best fit their needs. Conducts demonstrations and applications tests and studies on behalf of customers in Laser applications. Provides advanced technical support to Regional Managers and Product Manager. Essential Function(s) of the

- Hillside, NJ

CNC Swiss Programmer - Night Shift (4:30pm to 3am) Company is an AS9100 Quality System certified company. We are looking for experienced and highly skilled CNC Swiss Setup / Programmer’s and Operators who are capable of working in a fast paced, progressive environment. Duties & Essential Job Functions: · Responsible for the efficient setup and operation of CNC machines to produce component parts in accordance to engineering drawings, internal sketches or other specifications provided by....

- Farmington, CT

Process Engineer-Engineering / Tool Cell 1st shift – 7:00am-3:30pm Qualifications: BS Manufacturing / Mechanical EngineerComputer skills required: All Micro-soft office applicationsCAD-CAM; Auto-Cad / SolidWorksMulti-Tasking and good organizational skills required4-6 years experience in Manufacturing Engineering or Quality Engineering. Knowledge of Lean manufacturing and its components (i.e. Kaizen, Kanban, SMED, 5S, etc.).Ability to read blue prints and analyzes its feasibility to be....

- Farmington, CT

CNC Technical Lead: 1st shift – 7:00am-4:00pm Qualifications: High school graduate or equivalent with additional college-level courses in engineering and/or management desired.Proficient with Master Cam.Works with Caron System and Elbo Control Tool Setter.Experience operating CNC machines, creating new programs and making adjustments to existing programs.Knowledge of measuring equipment. CMM, dial indicators, comparator, micrometer and gauging.Strong oral and written communication skills and....

- Skokie, IL

Duties & Responsibilities: Set-up a machine for a specific job according to process sheetsPerforming Mazatrol programming & G Code too (MasterCam, & Esprit programming a plus)Input control instructions into control unitsCalibrate and adjust equipment using tools such as calipers, micrometers, protractors, etc.Inspect parts produced to ensure they meet specification, using basic inspection equipment.Produce parts to printOperate Mazak Quick Turn 30 lathe plus Haas TL2 latheJob....

- Queens, NY

Summary Responsible for generating CNC Lathe programs for production as well as tooling. Also supporting the production machine shop with complete, accurate and cycle-efficient CNC programming which meets all customer and companies’ quality, productivity and safety requirements. Compensation is commensurate with experience.Duties and Responsibilities Develops, prepares, optimizes, and maintains CNC Lathe programs. Develop a concept for machining & set up on the machine. Develops, prepares,

- Farmington, CT

Coiler Set-up-Small Coil l***HIRING BONUS- $2,000*** 1st shift – 7:00am-3:30pm Qualifications: High school graduate or equivalentMinimum of 5 years coiling experienceGood communication skills both verbal and writtenBasic understanding of blueprintsAbility to use common inspection equipment (Micrometers, Verniers, Comparators Load testers, Etc.)Knowledge of Sleeper & Hartely coilers series 7900 & 790 & BHSAbility to take direction both written & verbal in order to carry out....


This is a permanent, full-time position offering a great salary, a benefits package, and a fun and friendly work environment! Responsibilities: - Help with supervising and documenting project schedules, change-orders, submittals, budgets, and submit RFI’s for approval. - Develop and maintain relationships with GC’s, Owners, and other Subcontractors. - Manage time between job site visits and time in office overseeing one or several projects and assist the Project Manager(s)/Senior Project....

81-100 of 539 results